Dr. P.K. Singh

Basic Details

Name

Dr. P.K. Singh

Designation

Professor

Department

Mechanical Engineering

Contact

Phone (O)

01672-253292

Phone(R)

01672-253293

e-mail

pkschauhan@yahoo.com

Educational Details

Educational Qualification

1. B. Tech.(Mechanical Engg.) from Institute of Engineering & Technology (IET), Lucknow in year 1990
2. M. Tech.(Mechanical Engg., Spl. Production) from Institute of Technology, B H U (now IIT) Varanasi in 1992
3. Ph. D. (Mechanical Engg) from Indian Institute of Technology (IIT), Roorkee in 2005

Experience

Experience

1. Professor at Department of Mechanical Engg., SLIET Longowal, wef 13-03-2007
2. Asst. Professor at Department of Mechanical Engg.,SLIET Longowal, 13.03.1999 to 12.03.2007
3. Lecturer at Department of Mechanical Engg.,SLIET Longowal, 27.09.1994 to 12.03.1999
4. GAT at Scooters India Ltd. Lucknow, 22.06.1993 to 21.06.1994
5. Production Engineer at Encardio-rite Electronics (P) Ltd. Lucknow, 09.11.1992 to 08.05.1993

Professional Memebership

Professional Membership

Life member (LM 1006) of Indian Society of Mechanical Engineers (ISME), Sept. 2005
Life member (LM 190) of Indian Science Congress Association (ISCA), 1997
Life member (LM 091), Association for Machines & Mechanisms (AMM), Jan 1996
Life member (LM 20585), Indian Society of Technical Education (ISTE), 1995

Award

Award

Selected as a member of “Young Researchers’ and Scientists’ International Committee” (DAAAM International, Vienna) for 2007.

Selected as a member of “Young Researchers’ and Scientists’ International Committee” (DAAAM International, Vienna) for 2004.

Publications

Publications

(a) International Journals

1. Kamal Deep and Singh, P. K. (2016) Dynamic Cellular Manufacturing System Design Considering Alternative Routing and Part Operation Tradeoff using Simulated Annealing based Genetic Algorithm, Sadhana, 41(9): 1063–1079
2. Mann, H. S. and Singh, P. K. (2016). Conceptual Development of an Energy Recovery from the Chimney Flue Gases using Ducted Turbine system, Journal of Natural Gas Science and Engineering, 33 (July): 448-457.
3. Kamal Deep and Singh, P. K. (2015) Design of Robust Cellular Manufacturing System for Dynamic Part Population Considering Multiple Processing Routes using Genetic Algorithm, Journal of Manufacturing Systems, 35: 155-163.
4. Deep, K. and Singh, P. K. (2015). Machine Cell Formation: using Genetic Algorithm based Heuristic Considering Alternative Route. International Journal of Operational Research, 24 (1): 83-101.
5. Bhardwaj, B., Kumar R. and Singh, P. K. (2014), Effect of Machining Parameters on Surface Roughness in End Milling of AISI 1019 Steel, Proc. IMechE (Part B): Journal of Engineering Manufacture, 2014, 228: 704-714.
6. Bhardwaj, B., Kumar R. and Singh, P. K. (2014), An Improved Surface Roughness Prediction Model using Box-Cox Transformation with RSM in End Milling of EN 353, Journal of Mechanical Science and Technology, 28 (12): 5149-5157.
7. Bhardwaj, B., Kumar R. and Singh, P. K. (2014), Surface Roughness (Ra) Prediction Model for Turning of AISI 1019 Steel using Response Surface Methodology and Box–Cox Transformation, Proc. IMechE (Part B) Journal of Engineering Manufacture, 228: 223-232.
8. Bhardwaj, B., Kumar R. and Singh, P. K. (2014), Prediction of Surface Roughness in Turning of EN 353 using Response Surface Methodology, Trans. Indian Institute of Metals, 67(3): 305-313.
9. Bhardwaj, B., Kumar R. and Singh, P. K. (2010), A Discussion on Study of Surface Roughness in Turning, International Journal of Applied Engineering Research, 5(17): 2887-2898.
10. Pandit, A. K., Singh A., Kumar R. Singh, P. K. (2010) Multi-criteria Scheduling with Uncertainties: A Review and Future Directions, International Journal of Applied Engineering Research, 5(17): 2983-2997.
11. Kamaldeep and Singh, P. K. (2010) Multi-Period Planning in Cellular Manufacturing – A Discussion, International Journal of Engineering Studies, 2(3): 251-262.
12. Singh, P. K., Jain, P. K., Jain, S. C. (2009), Important Issues in Tolerance Design of Mechanical Assemblies. Part-1: Tolerance Analysis, Proc. IMechE Journal of Engineering Manufacture, 223B(10): 1225-1247.
13. Singh, P. K., Jain, P. K., Jain, S. C. (2009), Important Issues in Tolerance Design of Mechanical Assemblies. Part-2: Tolerance Synthesis, Proc. IMechE Journal of Engineering Manufacture, 223B(10): 1249-1287.
14. Singh, P. K., Jain, P. K., Jain, S. C. (2008), Optimal Tolerance Design of Mechanical Assemblies for Economical Manufacturing in Presence of Alternative Machines – A GA Based Hybrid Approach, Proc. IMechE Journal of Engineering Manufacture, 222B(5): 591-604.
15. Singh, P. K., Jain, S. C., Jain, P. K. (2006), Concurrent Optimal Adjustment of Nominal Dimensions and Selection of Tolerances Considering Alternative Machines, Computer Aided Design, 38(10): 1074-1087.
16. Singh, P. K., Jain, S. C., Jain, P. K. (2005), Comparative Study of Genetic Algorithm and Simulated Annealing for Optimal Tolerance Design Formulated with Discrete and Continuous Variables, Proc. IMechE, Journal of Engineering Manufacture, 219B(10): 735-760.
17. Singh, P. K., Jain, S. C., Jain, P. K. (2005) Advanced Optimal Tolerance Design of Mechanical Assemblies Considering Interrelated dimension Chains and Process Precision Limits, Computers in Industry, 56(2): 179-194.
18. Singh, P. K., Jain, P. K., Jain, S. C. (2004) A Genetic Algorithm Based Solution to Optimal Tolerance Synthesis of Mechanical Assemblies with Alternative Manufacturing Processes – Focus on Complex Tolerancing Problems, International Journal of Production Research, 42(24): 5185-5215.
19. Singh, P. K., Jain, S. C., Jain, P. K. (2004) A Genetic Algorithm Based Solution to Optimal Tolerance Synthesis of Mechanical Assemblies with Alternative Manufacturing Processes – Benchmarking with the Exhaustive Search Method Using Lagrange’s Multiplier, Proc. IMechE, Journal of Engineering Manufacture, 218B(7): 765-778.
20. Singh, P. K., Jain, S. C., Jain, P. K. (2004) Concurrent Tolerance Design with Alternative Manufacturing Processes, International Journal of Simulation Modelling, 3(2): 5-16.
21. Singh, P. K., Jain, S. C., Jain, P. K. (2003) Tolerance Allocation with Alternative Manufacturing Processes – Suitability of Genetic Algorithms, International Journal of Simulation Modelling, 2(1-2): 22-34.
22. Singh, P. K., Jain, P. K., Jain, S. C. (2003) Simultaneous Optimal Selection of Design and Manufacturing Tolerances with Different Stack-up Conditions Using Genetic Algorithms, International Journal of Production Research, 41(11): 2411-2429.
23. Singh, P. K., Jain, S. C., Jain, P. K. (2003) Tolerance Analysis of Mechanical Assemblies Using Monte Carlo Simulation, International Journal of Industrial Engineering, 10(2): 188-196.

(b) National Journals

1. Singh, P. K. (2003) Random Sampling for Scientific and Engineering Applications, Everyman’s Science, 38(2): 87-94.

(c) Book Chapters

1. Singh, P. K., Jain, S. C., Jain, P. K. (2005) Advanced Tolerance Design Problem – Mathematical Formulation and Solution Methodology, DAAAM International Scientific Book 2005, B. Katalinic (Ed), ISSN 1726-9687, ISBN 3-901509-43-7, DAAAM International Vienna, pp 609-626.
2. Singh, P. K., Jain, S. C., Jain, P. K. (2003) Integrated Optimal Tolerance Design in Mechanical Assemblies, in DAAAM International Scientific Book 2003, B. Katalinic (Ed), ISSN 1726-9687, ISBN 3-901509-30-5, DAAAM International Vienna, pp 555-568.

(d) Conference Proceedings

1. Bhardwaj, B., Kumar, R. and Singh, P. K. (2013) Surface Roughness Model for End Milling of AISI 1019 Steel with Rhombus-Shaped PVD Coated Carbide Inserts, 3rd International Conference on Production and Industrial Engineering (CPIE-2013): 720-727, held on 29-31 March, 2013 at Dr. B R Ambedkar national Institute of Technology, Jalandhar.
2. Bhardwaj, B., Kumar, R. and Singh, P. K. (2013) Surface Roughness Prediction by Response Surface Methodology in Turning of EN-353 Steel , 3rd International Conference on Production and Industrial Engineering (CPIE-2013): 728-734, held on 29-31 March, 2013 at Dr. B R Ambedkar national Institute of Technology, Jalandhar.
3. Manikanandan, V., Davidson, M. J., Singh, P. K., (2005) Mechanical Performance of Randomly Oriented Sann-Hemp/Glass Fiber Reinforced Polyester Hybrid Composites, Proc. National Seminar on Recent Advances in Polymer Science & Technology (RAPT – 05), SLIET Longowal, Dec. 10-11, pp. 102-108.
4. Singh, P. K., Jain, S. C., Jain, P. K. (2003) Optimal Tolerance Allocation of Mechanical Assemblies with Alternative Manufacturing Processes (Machines), 14th International DAAAM Symposium, Vienna, Austria, pp. 419-420.
5. Singh, P. K., Jain, P. K., Jain, S. C. (2003) Manufacturing Cost Models in Tolerance Design of Mechanical Assemblies, Proc. Int. Conf. CAD, CAM, Robotics and Autonomous Factories (INCARF – 03), IIT Delhi, Aug. 11-13.
6. Singh, P. K., Jain, S. C., Jain, P. K. (2002) Optimal Tolerance Design in Mechanical Assemblies Using Genetic Algorithms, Annals of DAAAM and Proceedings of 13th International DAAAM Symposium, Vienna, Austria, pp. 507-508.
7. Singh, P. K., Jain, S. C., Jain, P. K., Vaz, A. J. (2001) Tolerance Synthesis of Mechanical Assemblies: A Survey, Proceedings of the 10th National Conference on Machines and Mechanisms (NaCoMM), 21-22 Dec. at IIT Kharagpur, pp. 333-341.

(e) Technical Articles in Magazines

1. Singh, P. K., Kumar, R. (2000) Machine Tool Industries in India, Belgaum Market, 6(2): 4 – 6.
2. Singh, P. K. (2000) Simulation of Cutter Path in Machining Using Manual Part Programming (MPP) for Machining on FANUC Controlled Trainer CNC Machines, Belgaum Market, 6(5): 4 – 8.

Research/Projects

Research

Ph.D Supervision

Completed 01
Ongoing 03

M. Tech. Dissertation

Completed 13
Ongoing 03